Question Detail

A tap can fill a tank in 6 hours. After half the tank is filled then 3 more similar taps are opened. What will be total time taken to fill the tank completely.

2 hours 30 mins
2 hours 45 mins
3 hours 30 mins
3 hours 45 mins

Answer: Option D

Explanation:

Half tank will be filled in 3 hours
Lets calculate remaining half,

Part filled by the four taps in 1 hour = 4*(1/6) = 2/3

Remaining part after 1/2 filled = 1-1/2 = 1/2

\begin{aligned}
\frac{2}{3}:\frac{1}{2}::1:X \\

=> X = \left( \frac{1}{2}*1*{3}{2} \right) \\
=> X = \frac{3}{4} hrs = 45 \text{ mins} \\

\end{aligned}
Total time = 3 hours + 45 mins = 3 hours 45 mins

1. A tank can be filled by a tap in 20 minutes and by another tap in 60 minutes. Both the taps are kept open for 10 minutes and then the first tap is shut off. After this, the tank will be completely filled in what time ?

10 mins
15 mins
20 mins
25 mins

Answer: Option C

Explanation:

How we can solve this question ?
First we will calculate the work done for 10 mins, then we will get the remaining work, then we will find answer with one tap work, As

Part filled by Tap A in 1 min = 1/20
Part filled by Tap B in 1 min = 1/60

(A+B)'s 10 mins work =
\begin{aligned}
10*\left(\frac{1}{20}+\frac{1}{60}\right) \\
= 10*\frac{4}{60} = \frac{2}{3} \\
\text{Remaining work = } 1-\frac{2}{3} \\
= \frac{1}{3} \\

\text{METHOD 1} \\
=> \frac{1}{60}:\frac{1}{3}=1:X \\
=> X = 20 \\

\text{METHOD 2} \\

1/60 \text{ part filled by B in} = 1 min \\
1/3 \text{ part will be filled in} \\
= \frac{\frac{1}{3}}{\frac{1}{60}} \\
= \frac{60}{3} = 20
\end{aligned}

2. An electric pump can fill a tank in 3 hours. Because of a leak in the tank, it took 3 hours 30 min to fill the tank. In what time the leak can drain out all the water of the tank and will make tank empty ?

10 hours
13 hours
17 hours
21 hours

Answer: Option D

Explanation:

We can get the answer by subtrating work done by leak in one hour by subtraction of filling for 1 hour without leak and with leak, as

Work done for 1 hour without leak = 1/3
Work done with leak =
\begin{aligned}
3\frac{1}{2} = \frac{7}{2} \\
\text{Work done with leak in 1 hr= }\frac{2}{7} \\
\text{Work done by leak in 1 hr }\\
= \frac{1}{3} - \frac{2}{7} = \frac{1}{21}
\end{aligned}

So tank will be empty by the leak in 21 hours.

3. A leak in the bottom of a tank can empty the full tank in 6 hours. An inlet pipe fills water at the rate of 4 litres a minute. When the tank is full, the inlet is opened and due to the leak the tank is empty in 8 hours. The capacity of the tank (in litres) is

5780 litres
5770 litres
5760 litres
5750 litres

Answer: Option C

Explanation:

Work done by the inlet in 1 hour =
\begin{aligned}
\frac{1}{6}-\frac{1}{8} = \frac{1}{24} \\
\text{Work done by inlet in 1 min} \\
= \frac{1}{24}*\frac{1}{60}\\
= \frac{1}{1440} \\
=> \text{Volume of 1/1440 part = 4 liters} \\

\end{aligned}

Volume of whole = (1440 * 4) litres = 5760 litres.

4. A cistern can be filled in 9 hours but due to a leak at its bottom it takes 10 hours. If the cistern is full, then the time that the leak will take to make it empty will be ?

20 hours
19 hours
90 hours
80 hours

Answer: Option C

Explanation:

Part filled without leak in 1 hour = 1/9
Part filled with leak in 1 hour = 1/10

Work done by leak in 1 hour \begin{aligned}
= \frac{1}{9} - \frac{1}{10} \\
= \frac{1}{90}
\end{aligned}

We used subtraction as it is getting empty.

So total time to empty the cistern is 90 hours

5. Pipes A and B can fill a tank in 5 hours and 6 hours respectively. Pipe C can empty it in 12 hours. If all the three pipes are opened together, then the tank will be filled in.

\begin{aligned} 3\frac{9}{5} \end{aligned}
\begin{aligned} 3\frac{9}{17} \end{aligned}
\begin{aligned} 3\frac{7}{5} \end{aligned}
\begin{aligned} 3\frac{7}{17} \end{aligned}

Answer: Option B

Explanation:

Net part filled in 1 hour =
\begin{aligned}
\left(\frac{1}{5}+\frac{1}{6}-\frac{1}{12}\right) \\
= \frac{17}{60} hrs \\
= 3\frac{9}{17}
\end{aligned}